Your cart

Your cart is empty

BSI Insta Set Accelerators

SKU: ECA-BSI-151
Regular price $6.50
Unit price
per

Description

BSI Insta Set CA Accelerators

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

Available Sizes:
BSI-151 (Pump Spray): 2 Fl. oz (60 ml)
BSI-152 (Refill): 8 Fl. oz. (240 ml)
BSI-155 (Aerosol): 6.75 Fl. oz. (200 ml)


Directions for Use

After joining parts with cyanoacrylate (CA, super glue), spray the seams with  Insta-Set™ to cure the CA in 8 seconds. A bead of CA can then be applied  to the outside and corners of joints before another application of Insta-Set  to reinforce their strength. Insta-Set™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.

** Aerosols/Accelerators are considered ORM-D and must be shipped Ground.

BSI Insta Set Accelerators

SKU: ECA-BSI-151
Regular price $6.50
Unit price
per
Availability
 
(0 in cart)

Description

BSI Insta Set CA Accelerators

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

Available Sizes:
BSI-151 (Pump Spray): 2 Fl. oz (60 ml)
BSI-152 (Refill): 8 Fl. oz. (240 ml)
BSI-155 (Aerosol): 6.75 Fl. oz. (200 ml)


Directions for Use

After joining parts with cyanoacrylate (CA, super glue), spray the seams with  Insta-Set™ to cure the CA in 8 seconds. A bead of CA can then be applied  to the outside and corners of joints before another application of Insta-Set  to reinforce their strength. Insta-Set™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.

** Aerosols/Accelerators are considered ORM-D and must be shipped Ground.